PureFIBER ULTRAVISION
|
Pre-Terminated detachable Fiber optic HDMI 2.1(patented)
Our one-of-a-kind Detachable HDMI 2.1 terminations makes every data & multimedia installations
simple anywhere, with ready-for-signals plug 'n play connections without
requiring expensive converters adapters.
Our PureFIBER ULTRAVISION cables comes with 6 BUILT-IN EXTRA FIBERS to expand the connection to dual HDMI 2.1 or
Data, Bus, Smart Home, Fiber Internet, USB, VR, Controls, Alarms, Telephones, and all the ultimate signals
direct of via common MPO keystone wall plates. |
Full Fiber Optic for Power Surges Proofing
There is no Copper cable inside our ULTRAVISION, so it cannot capture any electrical shock from thunders storms, power surges, electrical interrferences, removing the risk of damages for your equipments.
Our cable can pull through a 3/4" conduit leaving space for any extra or
pre-existing cable.
Connectors comes protected by a plastic wrap plus an outer Nylon braided
sleeve, ready for any construction site, weather-proof.
A Kevlar Strands cord attach to any Fish Tape or Old Cables to pull the
PureFIBER cable through anywhere, also very crowded conduits with 90
degrees turns, without any risk to damage the fibers. |
Fiber Optics
One MPO Female connectors with 12 OM3 Multi Mode Fiber Optics
each
Each Fiber strand supports 100 Gigabit/s Speed - TOTAL 1.2 TERABIT
6 fibers are used per each connected HDMI
MPO connection standard is TYPE-A Straight (1to1 - 12to12), no crossing.
MPO can be connected direct or via MPO Keystones through wall plates |
Extended AUDIO RETURN CHANNEL(patented)
Our special Audio Return Channel over fiber Priority transports
perfect PCM stereo or DOLBY Surround 5.1 for up to
330 feet ( 100 meters ) with no loss.
Different from other cables, the PureFIBER transports the ARC audio return channel
over fibers ( patented ) for perfect sound quality.
|
Cable Ratings
LSZH CL3 FT4 Fire Rated for commercial & residential applications
UV Rated can be used directly exposed to sun light outdoor,
water-rain-weather resistant.
Can be buried in conduits, resist to outdoor moisture.
In-Wall Rated, Plenum, In-Conduit, In Door, Out Door.
Operating Temperature Typ. -40°C to +105°C
Outer Jacket Diameter 4 millimeters
Max Pull Diameter (at largest connectors point) 0.58 inches / 14.77
millimeters |
HDMI Terminations (included accessory)
|
Detachable Fiber Optic HDMI Termination (patented)
World-Wide Exclusive patented 8K Removable Fiber optic
termination allow to pass the main cable anywhere then connect the HDMI,
reducing the required diameter of the main fiber cable to pass in any
conduit without the risk of damaging the HDMI connectors.
Removable HDMI connectors can be replaced at any time without the need
to replace the entire cable, making the PureFIBER ultravision solution ideal for
Home, residential, commercial integration, replacing slow cat6/7/8
extension solutions which also limits the HDMI quality to max 10
gigabit, bottleneck of the cable speed.
|
Full HDMI 2.1 HD/4K/8K/10K
Our FIBER PLUGS HDMI 2.1 PRO fiber optic HDMI extenders terminations
supports all HDMI formats up to the latest HDMI 2.1 48 gigabit.
Specifications includes:
- Fiber Optic laser transmission for pure error-free noise-free
connection of video & sound no copper cable can do.
- Full Compatibility with any legacy HDMI TMDS up to HDMI 2.1 FRL
48gigabit/s full speed
- Full Compatibility with any legacy HDCP up to HDCP 2.3 or Higher
- backwards compatible with earlier HDMI versions such as HDMI
1.3/1.4/2.0a/2.0b
- supports any resolution including SD HD 3D 4K 8K 10k
- Supports all frames rates including 4K@30 4K@60 4K@120Hz 8K@60 (and
world-wide variants)
- Supports DSC 4K@240Hz
- Supports 4K@144Hz 4:4:4 Uncompressed
- Full 4:4:4 HDR10+ Uncompressed (HDMI 2.1 Standard FRL 48gigabit full
speed)
- can send from the source to the display any Dolby Atmos, THX, TRUE-HD, object-based audio, uncompressed 5.1 and 7.1, and 32-channel uncompressed audio
- Full Specs HDMI 2.1 including DSC, ALLM, QFT, QMS, VRR, Dynamic HDR, |
Extended CEC Remote Controls
PureFIBER PRO Fiber Cables includes our Enhanced Hi-Velocity CEC
Consumer Electronic Control link enabling the discovery and control of
all the connected HDMI cec devices directly from the TV or Projector
remote control, without the need for multiple remote controls.
Simply connect your TV or Projector with our PureFIBER Cable to the AV
receiver away in the basement or closet, and the TV/Projector will find
all the devices. Only legacy old HDMI devices or non-cec capable devices
will not be discovered, and for these simply use a traditional IR
blaster such as our IR KIT. |
Fiber Ethernet (optinal accessory)
|
Fiber To 4 Ports Ethernet
Single LC Fiber To 4 Ports Gigabit Layer-2 Adapter
Hi-Performance Network Switch
Requires Just one single LC Fiber plug out of the available one in the
PureFIBER cable
Convert 4 ports Gigabit Ethernet to Fiber with Zero Ping Lag for maximum
performances on HD 4K 8K intrnet streaming, Internet TV, On-Line Gaming,
Smart TV playback eliminating LAN Buffering or speed drops, Virtual
Reality, Youtube broadcasting, Social Media, HD 4K 8K Live meeting, etc.
|
Full Modem Speed to the Room
Eliminates the Lag and speed drop or speed fluctuation caused
by CAT-5/6/7 cables, delivering the full modem speed over fiber to each
room. |
Multiple Devices
Four Ethernet full-speed ports to connects Smart TV access/streaming,
Smart Home HUBs in the room within the reach of smart devices such as
lights, sensors, curtains, etc.., VOIP Phone, Wired Computer internet
access, Gaming Consoles, in-room wifi AP access point repeaters, or any
other combination.
On the Electrical Closet or cabinet side of the cable another 4 Port
adapter connects to the Main modem delivering the full modem speed to
other local devices (layer-2 switch) plus the room via fiber.
Multiple Cables to multiple rooms will have multiple of these 4 Ports
adapters, so the first connects to the internet modem and then
daisy-chain to the other 4 ports devices, creating a powerful scalable
multi-port switch in the closet. |
Simplify Fiber Internet Distribution
Where a Fiber Optic Internet Modem is installed, the ULTRAVISION cable
can connect the modem SFP fiber output directly to one of the available
Fiber connectors, delivering Pure Fiber connection to the room.
In the room one of the 4 PORTS fiber to RJ45 Ethernet adapter will
transform the fiber link from the modem to Electric for the classic
ethernet devices connection |
Fiber Breakout Pigtail (optional accessory)
|
MPO To mpo hdmi + 6 LC Single Fibers
Breakout 6 LC OM3 MM Fibers from the main ULTRAVISION fiber connector
Each LC Fiber Connector provides 100 Gigabit of full fiber speed.
Each LC Fiber connector is COLOR-CODED making it simple to connect the
same color both sides of the cable for a wanted connection.
Each LC Fiber connector is independent and has its own bandwidth
independent from any other signal in the cable. |
Connects Any Expansion
Multiple simultaneous expansions / terminations can be
connected using the single LC Fiber connectors such as
- Additional Ethernet adapters to create separated newtorks (smart-home
divided from internet) or KIDS SAFE Networks
- WiFi access points
- Extra HDMI Screens or sources (up to 12 extra HDMI 2.0b 128gbps HDR
4K60 4:4:4 on the same cable)
- One or multiple KVM Keyboard Video Mouse connectors to create meeting
desks or home offices leaving the computers away
- Audio over Fiber
- Controls over Fiber
- RS232 over fiber
- IR over Fiber
- Any device with an SFP Fiber slot can be connected
- Future TVs with SFP ONLY network access will be connected using ONE
single fiber (up to 12 TVs 8K)
- And more as Fiber optic is the future |
Can Pass via wall plate
Connect the Main cable inside the wall to an MPO Fiber
Keystone.
Plug the Pig Tail from outside to the wall plate.
Connect all the devices to each single fiber |
Extendable
The 12 LC Fiber Plugs Pig Tail is 1 ft (30 centimeters) long
and connect all the devices locally to the wall plate attached to the
wall near by
Usually the wall plate and devices can be behind the TV or Monitor
screens, or at the projector, hiding all the connections and extra
devices.
Where needed, each of the LC Fiber connectors can be extended as needed
with no loss using simple LC Coupler & patch cords to connect devices
away from the wall plate such as on a desk, under a desk, or so.
Longer Pig Tails are also available upon request to fit any installation
need. |
Install the Cable & Decide Later what to connect
|
Connect anything Today & Tomorrow
A vast range of accessories are available to connect
anything.
It is common to install the cable with a wall plate to each room or desk
then add out of the wall plate any termination needed time by time.
Available Accessories & Terminations includes:
- HDMI 2.1 Termination Cords ( up to FOUR HDMI 4K/8K 2.1 48Giga over the
same cable, also bi-directional)
- DP Display Port Termination Cords
- USB-C 3.2 termination cords (computer or Virtual Reality or any USB-C
3.x such as Web Cams, or other devices)
- KVM Keyboard Video Mouse connectors pod
- Fiber Splitters to connect mode devices out of the wall plate plug
- IR InfraRed remote control blaster
Each LC Fiber connector is COLOR-CODED making it simple to connect the
same color both sides of the cable for a wanted connection.
Each LC Fiber connector is independent and has its own bandwidth
independent from any other signal in the cable. |
Connects Any Expansion
Multiple simultaneous expansions / terminations can be
connected using the single LC Fiber connectors such as
- Additional Ethernet adapters to create separated newtorks (smart-home
divided from internet) or KIDS SAFE Networks
- WiFi access points
- Extra HDMI Screens or sources (up to 12 extra HDMI 2.0b 128gbps HDR
4K60 4:4:4 on the same cable)
- One or multiple KVM Keyboard Video Mouse connectors to create meeting
desks or home offices leaving the computers away
- Audio over Fiber
- Controls over Fiber
- RS232 over fiber
- IR over Fiber
- Any device with an SFP Fiber slot can be connected
- Future TVs with SFP ONLY network access will be connected using ONE
single fiber (up to 12 TVs 8K)
- Any Future Device, without changing the cable |
|
