PureFIBER XG Main Cable
|
Pre-Terminated Fiber+Electric (patented)
Our one-of-a-kind IROvF pre terminated "Fiber+Electric patch
cord cables" (patented) makes every data & multimedia installations
simple anywhere, with ready-for-signals plug 'n play connections without
requiring expensive converters adapters.
Where standard Hybrid Pre-terminated cables does nothing, Our PureFIBER
cables connects Audio, Video, Data, Bus, Smart Home, Fiber Internet,
USB, VR, Controls, Alarms, Telephones, and all the ultimate signals
direct of via common keystones wall plates. |
Pony-Tail Staggered Connectors (patented)
Pre-Terminated connectors are staggered to reduce the pulling
diameter through walls, conduits, raceways.
Our cable can pull through a 3/4" conduit leaving space for any extra or
pre-existing cable.
Connectors comes protected by a plastic wrap plus an outer Nylon braided
sleeve, ready for any construction site, weather-proof.
A Kevlar Strands cord attach to any Fish Tape or Old Cables to pull the
PureFIBER cable through anywhere, also very crowded conduits with 90
degrees turns, without any risk to damage the fibers. |
Fiber Optics
One MPO Female connectors with 4 OM3 Multi Mode Fiber Optics
each - Total 4 Fibers
Each Fiber strand supports 100 Gigabit/s Speed
Total Cable Bandwidth is 400 Gigabit/s
MPO connection standard is TYPE-A Straight (1to1, 2to2, 3to3,4to4,
5/6/7/8/9/10/11/12 NC), no crossing.
MPO can be connected direct or via MPO Keystones through wall plates |
Electric Signals
One Gold Plated Hi-Bandwidth 3.5mm TRS Plug link for any
Analog/Digital/Bus/GPI/Trigger/IR signals
The TRS plug ( Tip , Ring, Sleeve ) has a Ultra High Velocity twisted
pair shielded cable delivering >100dB s/n for analog applications such
as unbalanced mono or stereo or XLR balanced audios.
Typical connections includes: L/R Analog audio, SPDIF digital
audio, AES EBU XLR audio, IR Infrared remote control blasters, GPI &
Triggers for screens or controls, Analog Telephone lines, Alarms, Smart
Home Data Bus, Sound Feed to Sound Bars or SubWoofers with zero noise
zero lag, Music return from in-room bluetooth receivers or DJ systems or
voice controlled Smart Home players to feed the sound from the room back
to the amplifiers, AUX sound feed to sound bars for whole home sound
distribution, USB 2.0 gaming controllers extension with absolute zero
lag using our USB ZERO adaptor, any other analog/digital signal within 1
Mhz bandwidth.
TRS can be connected direct or via 3.5mm Keystones through wall plates.
Variety of 3.5mm adapter connectors or cables are available to connect
TRS to XLR, Screw Terminals, RCA, BNC, or any other type of connector,
also with extension cable from a wall plate to the device. |
Extended eARC (patented)
Our special eARC Priority Dedicated Gold Plated connector
transports perfect full uncompressed eARC Enhanced Audio Return Channel
for up to 330 feet ( 100 meters ) with no loss.
Different from other cables, the PureFIBER transports the ARC / eARC
over a special link ( patented ) dedicated ( not shared with other
signals ), unique in the industry.
As result, the PureFIBER PRO cable is the Best cable for 4K 8K Vision
Atmos Home Theater installations. |
Digital Coax/ARC/eARC
The digital coax can be used to return ARC/eARC audio from
the TV/Projector back to the AV receiver connecting it to the special
coax coming out on our HDMI connectors.(patented ARC/eARC over long run
coax)
When ARC/eARC is not used, our 75 Ohm Hi-Velocity Digital Coax cable can
be used for for any 3G-SDI
Video, RF Television (SAT/CABLE/AERIAL), digital bus, Security Video
Cameras, Smart Home Data, MOCA, A/D audio, USB controller extension
system (in addition to the TRS links)
Gold Plated Coax connector is SMA 75ohm (custom) and comes with SMA to F
adapters for both sides of the cable. |
CAT-7 Ultra Ethernet
Our PureFIBER Hybrid fiber optic cable includes a
High-Performances double gold shielded 10 Gigabit ethernet cable, ready
to plug.
Our pre-terminated CAT-7 is pre-terminated with Gold-Plated professional
RJ45 connector to guarantee the maximum internet to the room speeds with
no loss and no lags.
Our CAT-7 brings to the room the same internet speed at the internet
modem side with no fluctuation, interferences, speed drops, packets
errors or collision, typical of CAT5/6 cables.
The benefit of using our included CAT-7 for the internet distribution is
Huge, as it makes any Internet TV Streaming such as Netflix, Hulu,
Youtube TVs always offered with the Best 4K@60/120 HDR10+ quality as
well Dolby Vision Atmos full sound, usually lost when CAT-5/6 or wifi
are used as the TV player "will tell to the server there is not enough
continuous bandwidth..."
With our CAT-7 the speed to the room is same as the original at the
mode, no drops, perfect playback, perfect gaming, no ethernet buffering,
no lags. |
Cable Ratings
CL3 FT4 Fire Rated for commercial & residential applications
UV Rated can be used directly exposed to sun light outdoor,
water-rain-weather resistant.
Can be buried in conduits, resist to outdoor moisture.
In-Wall Rated, Plenum, In-Conduit, In Door, Out Door.
Operating Temperature Typ. -40°C to +105°C
Outer Jacket Diameter 10 millimeters
Max Pull Diameter (at largest connectors point) 0.58 inches / 14.77
millimeters |
HDMI Terminations (included accessory)
|
Detachable Fiber Optic HDMI Termination (patented)
World-Wide Exclusive patented 8K Removable Fiber optic
termination allow to pass the main cable anywhere then connect the HDMI,
reducing the required diameter of the main fiber cable to pass in any
conduit without the risk of damaging the HDMI connectors.
Removable HDMI connectors can be replaced at any time without the need
to replace the entire cable, making the PureFIBER solution ideal for
Home, residential, commercial integration, replacing slow cat6/7/8
extension solutions which also limits the HDMI quality to max 10
gigabit, bottleneck of the cable speed.
|
Full HDMI 2.1 HD/4K/8K/10K
Our LASERTAIL PRO fiber optic HDMI extenders terminations
supports all HDMI formats up to the latest HDMI 2.1 48 gigabit.
Specifications includes:
- Fiber Optic laser transmission for pure error-free noise-free
connection of video & sound no copper cable can do.
- Full Compatibility with any legacy HDMI TMDS up to HDMI 2.1 FRL
48gigabit/s full speed
- Full Compatibility with any legacy HDCP up to HDCP 2.3 or Higher
- backwards compatible with earlier HDMI versions such as HDMI
1.3/1.4/2.0a/2.0b
- supports any resolution including SD HD 3D 4K 8K 10k
- Supports all frames rates including 4K@30 4K@60 4K@120Hz 8K@60 (and
world-wide variants)
- Supports DSC 4K@240Hz
- Supports 4K@144Hz 4:4:4 Uncompressed
- Full 4:4:4 HDR10+ Uncompressed (HDMI 2.1 Standard FRL 48gigabit full
speed)
- Dolby Atmos, THX, TRUE-HD, object-based audio, uncompressed 5.1 and
7.1, and 32-channel uncompressed audio
- Full Specs HDMI 2.1 including DSC, ALLM, QFT, QMS, VRR, Dynamic HDR, |
Extended Length eARC (patented)
Unique on the market our special Dedicated eARC Exclusive Priority link
connects the sound from the TV or projector back to the AV receiver up
to 330 Feet (100 meters) away in the basement or electrical closet
without losing the original surround quality while playing movies or
apps on the smart TV. Since there is no compression, no wire-sharing
with other signals, our eARC sound quality is Pure-Perfect, same as the
original, with no loss. |
Extended CEC Remote Controls
PureFIBER PRO Fiber Cables includes our Enhanced Hi-Velocity CEC
Consumer Electronic Control link enabling the discovery and control of
all the connected HDMI cec devices directly from the TV or Projector
remote control, without the need for multiple remote controls.
Simply connect your TV or Projector with our PureFIBER Cable to the AV
receiver away in the basement or closet, and the TV/Projector will find
all the devices. Only legacy old HDMI devices or non-cec capable devices
will not be discovered, and for these simply use a traditional IR
blaster such as our IR KIT. |
Install the Cable & Decide Later what to connect
|
Connect anything Today & Tomorrow
A vast range of accessories are available to connect
anything ( accessories to be purchased separately).
It is common to install the cable with a wall plate to each room or desk
then add out of the wall plate any termination needed time by time.
Available Accessories & Terminations includes:
- USB 2.0 Zero Lag Gaming controllers adapters
- KVM Keyboard Video Mouse connectors pod
- Fiber Splitters to connect mode devices out of the wall plate plug
- IR InfraRed remote control blaster
- XLR cable for any Analog Audio / Digital Audio / DMZ controls
- RCA cable for any Analog Audio / Spdif / Subwoofer feed / aux audio
feeds
- SCREW TERMINALS adapter for Triggers or GPI
-MPO to LC fiber adapter
Each LC Fiber connector is COLOR-CODED making it simple to connect the
same color both sides of the cable for a wanted connection.
Each LC Fiber connector is independent and has its own bandwidth
independent from any other signal in the cable. |
|
