PureFIBER PRO Main Cable
|
Pre-Terminated Fiber+Electric (patented)
Our one-of-a-kind IROvF pre terminated "Fiber+Electric patch
cord cables" (patented) makes every data & multimedia installations
simple anywhere, with ready-for-signals plug 'n play connections without
requiring expensive converters adapters.
Where standard Hybrid Pre-terminated cables does nothing, Our PureFIBER
cables connects Audio, Video, Data, Bus, Smart Home, Fiber Internet,
USB, VR, Controls, Alarms, Telephones, and all the ultimate signals
direct of via common keystones wall plates. |
Pony-Tail Staggered Connectors (patented)
Pre-Terminated connectors are staggered to reduce the pulling
diameter through walls, conduits, raceways.
Our cable can pull through a 3/4" conduit leaving space for any extra or
pre-existing cable.
Connectors comes protected by a plastic wrap plus an outer Nylon braided
sleeve, ready for any construction site, weather-proof.
A Kevlar Strands cord attach to any Fish Tape or Old Cables to pull the
PureFIBER cable through anywhere, also very crowded conduits with 90
degrees turns, without any risk to damage the fibers. |
Fiber Optics
Two MPO Female connectors with 12 OM3 Multi Mode Fiber Optics
each - Total 24 Fibers
Each Fiber strand supports 100 Gigabit/s Speed
Total Cable Bandwidth is 2.4 Terabit/s
MPO connection standard is TYPE-A Straight (1to1 - 12to12), no crossing.
MPO can be connected direct or via MPO Keystones through wall plates |
Electric Signals
Three Gold Plated Hi-Bandwidth 3.5mm TRS Plugs links for any
Analog/Digital/Bus/GPI/Trigger/IR signals
Each TRS plug ( Tip , Ring, Sleeve ) has a Ultra High Velocity twisted
pair shielded cable delivering >100dB s/n for analog applications such
as unbalanced mono or stereo or XLR balanced audios.
Any combination mono or bi-directional signals can transported over the
three TRS without interfering eachother.
Typical connections includes: L/R Analog audio, SPDIF digital
audio, AES EBU XLR audio, IR Infrared remote control blasters, GPI &
Triggers for screens or controls, Analog Telephone lines, Alarms, Smart
Home Data Bus, Sound Feed to Sound Bars or SubWoofers with zero noise
zero lag, Music return from in-room bluetooth receivers or DJ systems or
voice controlled Smart Home players to feed the sound from the room back
to the amplifiers, AUX sound feed to sound bars for whole home sound
distribution, USB 2.0 gaming controllers extension with absolute zero
lag using our USB ZERO adaptor, any other analog/digital signal within 1
Mhz bandwidth.
TRS can be connected direct or via 3.5mm Keystones through wall plates.
Variety of 3.5mm adapter connectors or cables are available to connect
TRS to XLR, Screw Terminals, RCA, BNC, or any other type of connector,
also with extension cable from a wall plate to the device. |
Extended eARC (patented)
Our special eARC Priority Dedicated connector transports
perfect full uncompressed eARC Enhanced Audio Return Channel for up to
330 feet ( 100 meters ) with no loss.
Different from other cables, the PureFIBER transports the ARC / eARC
over a special link ( patented ) dedicated ( not shared with other
signals ), unique in the industry.
As result, the PureFIBER PRO cable is the Best cable for 4K 8K Vision
Atmos Home Theater installations. |
Digital Coax
Ultra-High performance 75ohm Digital Coaxial for any 3G-SDI
Video, RF Television (SAT/CABLE/AERIAL), digital bus, Security Video
Cameras, Smart Home Data, MOCA, A/D audio, USB controller extension
system (in addition to the TRS links)
Gold Plated Coax connector is SMA 75ohm (custom) and comes with SMA to F
adapters for both sides of the cable. |
Cable Ratings
CL3 FT4 Fire Rated for commercial & residential applications
UV Rated can be used directly exposed to sun light outdoor,
water-rain-weather resistant.
Can be buried in conduits, resist to outdoor moisture.
In-Wall Rated, Plenum, In-Conduit, In Door, Out Door.
Operating Temperature Typ. -40°C to +105°C
Outer Jacket Diameter 10 millimeters
Max Pull Diameter (at largest connectors point) 0.58 inches / 14.77
millimeters |
Extended Length eARC (patented)
Unique on the market our special Dedicated eARC Exclusive Priority link
connects the sound from the TV or projector back to the AV receiver up
to 330 Feet (100 meters) away in the basement or electrical closet
without losing the original surround quality while playing movies or
apps on the smart TV. Since there is no compression, no wire-sharing
with other signals, our eARC sound quality is Pure-Perfect, same as the
original, with no loss. |
Extended CEC Remote Controls
PureFIBER PRO Fiber Cables includes our Enhanced Hi-Velocity CEC
Consumer Electronic Control link enabling the discovery and control of
all the connected HDMI cec devices directly from the TV or Projector
remote control, without the need for multiple remote controls.
Simply connect your TV or Projector with our PureFIBER Cable to the AV
receiver away in the basement or closet, and the TV/Projector will find
all the devices. Only legacy old HDMI devices or non-cec capable devices
will not be discovered, and for these simply use a traditional IR
blaster such as our IR KIT. |
Simplify Fiber Internet Distribution
Where a Fiber Optic Internet Modem is installed, the PureFIBER PRO cable
can connect the modem SFP fiber output directly to one of the available
Fiber connectors, delivering Pure Fiber connection to the room.
In the room one of the 4 PORTS fiber to RJ45 Ethernet adapter (
optional) will
transform the fiber link from the modem to Electric for the classic ethernet devices connection |
Can Pass via wall plate
Connect the Main cable inside the wall to an MPO Fiber
Keystone.
Plug the Pig Tail from outside to the wall plate.
Connect all the devices to each single fiber |
Install the Cable & Decide Later what to connect
|
Connect anything Today & Tomorrow
A vast range of accessories are available to connect
anything.
It is common to install the cable with a wall plate to each room or desk
then add out of the wall plate any termination needed time by time.
Available Accessories & Terminations (to be purchased separately) includes:
- HDMI 2.1 Termination Cords ( up to FOUR HDMI 4K/8K 2.1 48Giga over the
same cable, also bi-directional)
- DP Display Port Termination Cords
- USB-C 3.2 termination cords (computer or Virtual Reality or any USB-C
3.x such as Web Cams, or other devices)
- USB 2.0 Zero Lag Gaming controllers adapters
- KVM Keyboard Video Mouse connectors pod
- Fiber Splitters to connect mode devices out of the wall plate plug
- IR InfraRed remote control blaster
- XLR cable for any Analog Audio / Digital Audio / DMZ controls
- RCA cable for any Analog Audio / Spdif / Subwoofer feed / aux audio
feeds
- SCREW TERMINALS adapter for Triggers or GPI
Each LC Fiber connector is COLOR-CODED making it simple to connect the
same color both sides of the cable for a wanted connection.
Each LC Fiber connector is independent and has its own bandwidth
independent from any other signal in the cable. |
Connects Any Expansion
Multiple simultaneous expansions / terminations can be
connected using the single LC Fiber connectors such as
- Additional Ethernet adapters to create separated newtorks (smart-home
divided from internet) or KIDS SAFE Networks
- WiFi access points
- Extra HDMI Screens or sources (up to 12 extra HDMI 2.0b 128gbps HDR
4K60 4:4:4 on the same cable)
- One or multiple KVM Keyboard Video Mouse connectors to create meeting
desks or home offices leaving the computers away
- Audio over Fiber
- Controls over Fiber
- RS232 over fiber
- IR over Fiber
- Any device with an SFP Fiber slot can be connected
- Future TVs with SFP ONLY network access will be connected using ONE
single fiber (up to 12 TVs 8K)
- Any Future Device, without changing the cable |
|